Welcome to our store

The home of all your camping, off-roading and rig building needs

Alu-Cab Rooftop Tent

 

LT-50 LIGHTWEIGHT ROOFTOP TENT

Introducing the LT- 50 lightweight tent – The best ultralight rooftop tent on the market with the same build quality as all our other products. You don’t need to be an overlander to live your best life, the LT-50 opens up a new opportunity of vehicle applications. It pops up within seconds, you can keep your bedding inside and it can carry a 30kg load up top. One of the standout features of the Alu-Cab rooftop tent is its lightweight construction and it has a nut slot lid and base frame for easy mounting of accessories such as awnings, shower cubes, ladder brackets, spades etc. The tent is made from lightweight, high-strength aluminum, which makes it easy to install and transport. The tent also features a compact, streamlined design that minimizes wind resistance while driving.

Tent weight – 46KGS | 101 LBS
Mattress – 4.55KGS | 10 LBS

Overall, the Alu-Cab lightweight rooftop tent is an excellent choice for adventurers who value durability, convenience, and comfort.

The LT-50 is the ideal tent for vehicles typically unable to support the Gen-3 range of tents, such as Subaru Outback / Crosstrek, Toyota Rav4 and many more! The LT-50 is not intended to replace the Gen 3-R, but rather be a more weekend lifestyle alternative for customers who do not require the full features of the 3-R.

INFORMATION

FEATURES:

  • Tent weight [excludes mattress, excludes ladder] – 46KGS | 101 LBS
  • Mattress weight – 4.55kgs | 10 LBS
  • 60 mm high-density foam mattress with zip-off cover 
  • Dual layer 280gsm UV resistant rip stop canvas
  • The rooftop tent is made from a lightweight aluminium construction
  • Wind resistant design thanks to single-sided opening
  • Stainless steel eyelets for the spring poles
  • Streamlined aerodynamic profile
  • 3-point access with a door/window on each side
  • Stainless steel 316 marine grade Gas-struts
  • Hard-shell structure that can carry additional gear [up to 30kgs] 
  • Opens and closes in seconds 
  • Top and bottom foam insulation

LT-50 ROOFTOP TENT ACCESSORIES AVAILABLE:

  • Removable Fly sheet/rain cover
  • 2m spec-built telescopic ladder with rungs that are broad and angled making it far more comfortable to climb into the tent barefoot
    [The ladder cannot be installed inside the tent. We advise using the Molle Plate and Ladder Storage Bracket for your convenience]
  • Ladder Storage Bracket
  • Ladder Extension
  • Roof Molle Plate
  • Wall Mount for the LT-50
  • Tent to Alu-Cab Load Bar Mounting Brackets
  • Universal LT-50 Tent Mounting Brackets

LOAD RATING FOR CARGO RAILS: 

The load rating for the cargo rails on the rooftop tent roof is 30kg. It is important to note that where the load is located on the roof, will determine how easy or difficult it is to open the tent. It is always suggested to shift heavier loads towards the front of the tent, and much lighter loads, like a solar panel, to the rear. Please ensure to check dynamic load rating of your vehicle before placing additional weight to the LT-50.

Alu-Cab advises to not exceed the speed limit of 120kmh.

Note: The Backrest and Drop-down Table are not compatible with the LT-50

DIMENSIONS

TENT WEIGHT [excludes mattress, excludes ladder] – 46KGS | 101 LBS
MATTRESS WEIGHT – 4.55KG | 10 LBS
MATTRESS THICKNESS – 60MM | 2.3”
MATTRESS DIMENSIONS – 1085 x 2070MM
TENT DIMENSIONS – 1261 X 2258 x 172MM | 49.6 x 88.89 x 6.77”

BRACKETRY AVAILABLE: (Excludes load bars)
Minimum load bar length: 1250mm | 49.2″

  1. UNIVERSAL LT-50 MOUNTING BRACKETS [To fit non Alu-Cab Load bars] 
  2. LT-50 TO ALU-CAB LOAD BAR MOUNTING BRACKETS
  3. LOAD BAR FEET FOR MOUNTING ALU-CAB LOAD BARS TO THE LT-50

 

  

 

 

 

Alu-Cab Gen 3R Expedition Rooftop Tent

 

THE NEW GEN 3-R ROOFTOP TENT HAS ADDITIONAL FEATURES

  • Updated look which increases the rigidity of the rooftop tent
  • Heater vent as a standard feature
  • Solar panel input as a standard feature
  • This upgrade now boasts a weight decrease to 76kgs

*Note: The Backrest and Drop-down Table are additional accessories to be purchased separately*

FEATURES

  • Side rain cover now comes as a standard feature
  • Spec-built telescopic ladder with rungs that are broad and angled making it far more comfortable to climb into the tent barefoot
  • Single zip opening doors
  • Zippable rear awning – the awning can zip up and stay rolled away. The awning only needs to be deployed when the weather dictates.
  • Stainless steel eyelets for the spring poles
  • Extended cargo rails creating more room and additional options for fitment to the roof
  • Raised air vent to help reduce condensation
  • 3D breathable mesh to further assist with condensation
  • The rooftop tent is made from a lightweight aluminium construction
  • Built-in cargo rails for the fitment of optional load bars
  • Hard-shell structure that can carry additional gear – solar panels, kayak, mountain bikes or camping table
  • Streamlined aerodynamic profile
  • 3-point access with a door/window on each side
  • Gas-strut assisted pop-up design
  • Opens and closes in seconds so you can still go on that late-afternoon game drive
  • 70 mm high-density foam mattress with zip-off cover
  • Quick-release ladder that stows inside your tent when closed
  • Storage pockets
  • Internal USB power points
  • Internal 12V plug point
  • Internal lighting
  • Rear door awning to keep the entrance dry
  • Dual-layer canvas for better insulation and protection
  • Wind resistant design thanks to single-sided opening
  • Top and bottom foam insulation for class leading insulation

LOAD RATING FOR CARGO RAILS:

The load rating for the cargo rails on the rooftop tent roof is 50kg. It is important to note that where the load is located on the roof, will determine how easy or difficult it is to open the tent.
It is always suggested to shift heavier loads towards the front of the tent, and much lighter loads, like a solar panel, to the rear.

THE NEW GEN 3-R ROOFTOP TENT HAS ADDITIONAL FEATURES

  • Updated look which increases the rigidity of the rooftop tent
  • Heater vent as a standard feature
  • Solar panel input as a standard feature
  • This upgrade now boasts a weight decrease to 76kgs

*Note: The Backrest and Drop-down Table are additional accessories to be purchased separately*

FEATURES

  • Side rain cover now comes as a standard feature
  • Spec-built telescopic ladder with rungs that are broad and angled making it far more comfortable to climb into the tent barefoot
  • Single zip opening doors
  • Zippable rear awning – the awning can zip up and stay rolled away. The awning only needs to be deployed when the weather dictates.
  • Stainless steel eyelets for the spring poles
  • Extended cargo rails creating more room and additional options for fitment to the roof
  • Raised air vent to help reduce condensation
  • 3D breathable mesh to further assist with condensation
  • The rooftop tent is made from a lightweight aluminium construction
  • Built-in cargo rails for the fitment of optional load bars
  • Hard-shell structure that can carry additional gear – solar panels, kayak, mountain bikes or camping table
  • Streamlined aerodynamic profile
  • 3-point access with a door/window on each side
  • Gas-strut assisted pop-up design
  • Opens and closes in seconds so you can still go on that late-afternoon game drive
  • 70 mm high-density foam mattress with zip-off cover
  • Quick-release ladder that stows inside your tent when closed
  • Storage pockets
  • Internal USB power points
  • Internal 12V plug point
  • Internal lighting
  • Rear door awning to keep the entrance dry
  • Dual-layer canvas for better insulation and protection
  • Wind resistant design thanks to single-sided opening
  • Top and bottom foam insulation for class leading insulation

LOAD RATING FOR CARGO RAILS:

The load rating for the cargo rails on the rooftop tent roof is 50kg. It is important to note that where the load is located on the roof, will determine how easy or difficult it is to open the tent.
It is always suggested to shift heavier loads towards the front of the tent, and much lighter loads, like a solar panel, to the rear.

INFORMATION

RT-R-B

Our upgraded pop up Rooftop Tent features a new design language, a heater port, built in solar panel input and more! Roof Top Tents are the perfect camping solution for those who want to enjoy nature without having to worry about bugs, rain or other weather conditions. They can be set up quickly and they provide shelter from all types of weather.

POP UP ROOFTOP TENTS

When rooftop tents first hit the market they were revolutionary, mostly because your tent and mattress (the two things that take up the most packing space) were now conveniently stored on your car roof. Of course, there are many more benefits to owning a rooftop tent, but likewise, there are plenty of cons, too.

Fortunately, most of these drawbacks are associated with soft-shell rooftop tents, as well as heavy canvas units that are difficult to flip open. For these reasons, our Expedition Tent has always followed a hard-shell design. The benefits of our rooftop tent include…

  • A gas-strut assisted design that takes seconds to open and close
  • A three-point entry / exit layout so you don’t have to plan your campsite around your tent
  • A more aerodynamic shape
  • You can close the tent with your bedding inside, and lastly…
  • Our Expedition Tent has always followed a hard-shell design.

What’s more, hard-shell tents typically last longer than their soft-shell equivalents, they’re also easier to clean, and far more resilient to rain, snow and windy weather conditions.

But most of all, from an overland-travel perspective (where you’re moving from one camp to the next), you just can’t beat the convenience of a popup roof top tent; which is why our ever popular Expedition Tent is now in its 3rd Generation design.

Over the years, we’ve been adding continuous improvements to our Expedition Tent, opting for a wider, more spacious layout, as well as a streamlined design that’s both aesthetically pleasing, and far more aerodynamic.

THREE CRITICAL FEATURES FOR A HARDTOP TENT

But even more so, three critical features have always been important to us while developing our hard-shell roof top tent:

1) COMFORT AND CONVENIENCE

Buying a rooftop tent is no different to buying a household bed, where comfort is critical; which is why we’ve specced our Expedition Camping Tent with a generous 75 mm high-density foam mattress. We’ve also included a reading light, USB charging ports (for your mobile phone), a 12V power socket, and a series of storage pockets where you can keep your keys, books and even your shoes.

2) FUNCTIONALITY

Thanks to the Expedition Tent’s robust aluminium housing, you have the option of fitting our Alu-Cab load bars. This means you can still pack large bulky items on top of your tent. Whether it be a solar panel, camping table, kayak, mountain bike, or our very own Roof Rack Tray, the Gen 3-R Rooftop Tent doesn’t prevent you from packing gear on your roof like other rooftop tents do.

3) INSULATION

Recognising that our tents are used by extreme adventure travellers across the globe, we wanted to build a tent that offered the best possible insulation against blazing African heat, as well as sub-zero temperatures found in Europe and North America. That said, the Gen 3-R roof structure and base are generously insulated with a closed-cell foam lining that offers excellent comfort and insulation all year round. We’ve also included an awning cover over the tent’s rear door, which helps to keep rain, snow and frost off the rear opening.

TIME FOR AN UPGRADE

So, if you’re looking to upgrade your current rooftop tent with a far more durable, versatile and easy-to-use option, look no further than our Gen 3-R Hard Top Tent – a product that has evolved into a supremely comfortable, spacious, and fast-pitching home away from home.